1. Set iron or heat press to 284-320ºF (140-160ºC). Higher temperatures can melt vellum backing. If using a household iron, set the dial between the cotton and wool setting with NO STEAM.
2. Place heat transfer with the adhesive side down onto your garment or item. If the adhesive is exposed to the iron or press, the design will adhere onto the press and will be difficult to remove.
3. If using a heat press, press down for 8 seconds. If using a household iron, press FIRMLY, straight down avoiding sweeping motions,for 8-12 seconds.
4. Please follow the instruction below that has been 'marked' specifically for your label.
cold peel: Wait until the transfer has been completely cooled. Then secure garment down and peel off vellum backing. Start at one corner and SWIFTLY remove the film.
hot peel: Secure garment down and immediately peel off vellum backing. Start at one corner and SWIFTLY remove the film. Do not peel slowly.
Add：20D, 201 Ningxia Rd, Putuo District, Shanghai 200063, China